Adjusting the Tram on a Silverback

Instructions are needed for adjusting/shimming the Tram of the X-axis and the Y-axis. The greatest challenge is how to adjust the X-axis. The Y-axis could easily be shimmed behind the Z-axis mount. Please advise.

It would probably be easier if you loosen the spindle clamp from the z axis, and square it to the spoilboard. Easier for the x axis. You can also shim behind the clamp if needed by using washers or cardboard, for the y axis. The silverback was not designed with essenteic screws in mind for finite tramming(which is found on more expensive industrial machines)