6550 Pro won't autohome

I own a 6550 Pro and runnings Windows 10.

My machine was working perfectly last night but today, when I turned it on the laser won’t return to Autohome position.
The laser goes to 0 on the x axis but not 0 on the Y.

Here are the console settings.

Waiting for connection…
ok
[VER:1.1.2022033001:]
[OPT:PHSW]
[MSG:Using machine:LKS TS3]
[MSG:Mode=AP:SSDI=MKS_DLC:IP=192.168.4.1:MAC=0C-DC-7E-4A-60-85]
ok
Homing
Home faile111
Home faile1:9
ALARM:9
Homing fail. Could not find limit switch within search distance. Defined as 1.5 * max_travel on search and 5 * pulloff on locate phases.
ok
Grbl 1.1 [‘$’ for help]
[MSG:‘$H’|‘$X’ to unlock]
[MSG:Caution: Unlocked]
ok
Any ideas what could be wrong
Thanks
Dale Pfeffer

Flick the switch on the back of the controller.

Thanks Shawn,
Yes i somehow bumped the switch.

Framing problem solved as well. I was changing settings in the move tab to fix autohome, this stopped the framing function.

Thanks
Dale